Specification:Item Type: Solar FountainMaterial: PlasticDiameter: Approx. 16cm / 6.3inWeight: Approx. 278g / 1.9ozColour: BlackShape: RoundPower: 1.4WBuilt in Battery: Lithium Battery 1500mAh (included)How to Use:1. Check the accessories before use, including 1 water pump, 1 solar panel and 3 nozzles.2. Check whether there is a white rubber waterproof rings on the water pump plug. Then, insert the plug into the socket labeled \"PUMP\" on the bottom of the solar panel. The plug should be inserted all the way. The part of the white waterproof rubber rings should be inserted into the hole and not exposed. Finally, the water pump outlet should be inserted into the bottom middle connection of the solar panel.3. Open the nozzle package, select the nozzle you like, and insert it into the middle interface of the solar panel.4. After the assembly is completed, turn the direction of the solar panel to the sun, and the water pump starts to work. Under the pump protection function, it will work intermittently. Without water, intermittent work will automatically stop 10 times. To restart, unplug the pump and plug it into an outlet.5. Put the assembled solar fountain into the pool and start spraying water. Sunlight cannot block the pool. If the water spray is not good, you can remove the spray head first to exhaust the gas inside the pump. After the water spray is normal, insert the nozzle again.Package List:1 x Solar Panel1 x Pump3 x Nozzle3 x Accessories1 x ManualNote:Please allow some errors due to manual measurement.